{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap, uncoated, M: M2,5
Article no.: 233631
Catalog no.: 131950
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable only under restricted conditions | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00282105 | |
| Holder shape | smooth shank with square drive | |
| Holder version | metric | |
| Holder size, metric | 2,8 mm | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 2.8 mm | |
| Length of shank LS | 37 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Thread type | M | |
| Cutter diameter D | 2.5 mm | |
| Nominal diameter of metric thread D | 2.5 mm | |
| Thread D | M2,5 | |
| Thread pitch | 0.45 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Chisel edge diameter | 2 mm | |
| Length of tapping part Lc | 10 mm | |
| Tap infeed length | 1.35 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Application for type of drilling | through hole; blind hole | |
| To depth (x diameter) | 1.5; 1.5 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 2.05 mm | |
| Core hole diameter guideline value | 2.05 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | yes | |
| Square-drive width across flats □ | 2.1 mm | |
| Normlänge L | 50 mm | |
| Tool material | HSS-E | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length L1 | 3.75 mm | |
| Overall length L | 50 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 371 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | red | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 233631 | |
| Catalog number | 131950 | |
| EAN / GTIN | 4045197070869 | |
| Manufacturer number | 131950 M2,5 | |
| Article class | 11H | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
15
P
15
P
6
P
3
H
4
H
3
H
3
Description
Version:
Sturdy version.
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by drilling the tapping hole ⌀ 0.05 to 0.3 mm larger.