{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill, TiAlN, ⌀×Length js14 DC: 10X80mm
Article no.: 233868
Catalog no.: 190730
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable only under restricted conditions | |
| Max. cutting depth, Full slot milling | 10 mm | |
| Max. cutting depth, Side milling | 14 mm | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00800105 | |
| Holder version | metric | |
| Holder size, metric | 8 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Arbor size | 8 | |
| Shank diameter DS | 8 mm | |
| Length of shank LS | 66.01 mm | |
| Cooling lubricant | yes | |
| Tool material | HSS-E | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Cutter diameter Dc | 10 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | js14 | |
| Cutting edge length Lc | 14 mm | |
| Number of effective cutters (peripheral side) Z | 1 | |
| Number of effective cutters (end face) Z | 1 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.13 mm | |
| Corner chamfer angle | 45 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 1 | |
| Cutting media, manufacturer’s designation | HSS-CO8 TIALN | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 80 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Machining method | shoulder milling (FEC); slot drilling (keyway cutting) (FNB); slot milling (FNU) | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Cutting depth in use | Full slot milling; Side milling |
Identification & Classification
| Article number | 233868 | |
| Catalog number | 190730 | |
| EAN / GTIN | 4045197098726 | |
| Manufacturer number | 190730 10X80 | |
| Article class | 11W | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
200
N
120
N
100
P
78
N
90
Description
Version:
Special cutting edge geometry for aluminium and plastics.
Frontal and peripheral cutting with only one cutting edge.
Frontal and peripheral cutting with only one cutting edge.
Application:
For milling slots on doors and windows of aluminium or plastic using high speed special milling machines (Elu, Haffner etc.).