{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide NC spotting drill 90° spiral flutes, TiAlN, ⌀ DC h6: 4mm
Article no.: 235104
Catalog no.: 121040
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | no | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0040 mm | |
| Holder tolerance class | h6 | |
| Shank diameter | 4 mm | |
| Shank length | 0 mm | |
| Cutter diameter, min. | 4 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | h6 | |
| Number of teeth | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 30 degrees | |
| Angle, 1st step | 90 degrees | |
| Product designation (type) | N | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | VHM TIALN | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Gauge length | 12 mm | |
| Usable length | 10 mm | |
| Overall length | 40 mm | |
| Weight | 7 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material | |
| Colour ring | without | |
| Type of product | spotting drill | |
| Content | single part |
Identification & Classification
| Article number | 235104 | |
| Catalog number | 121040 | |
| EAN / GTIN | 4045197038531 | |
| Manufacturer number | 121040 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
260
N
240
N
200
P
90
P
80
P
65
P
55
M
35
M
30
S
40
K
90
N
200
Description
Version:
Exactly central ground point. Easy spot drilling and high shape accuracy of the centre hole. Sturdy due to short flutes.
≥ ⌀ 6 mm with HB drive flat.
≥ ⌀ 6 mm with HB drive flat.
Application:
Point angle 90° for spot drilling and countersinking in one operation when a drill of smaller ⌀ is used afterwards.
Note:
Use the speed for the actual hole ⌀ (not generally the speed for the drill outer ⌀).