{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
T-slot cutter, uncoated, ⌀ DC × LC d11 × d11: 12,5X6mm
Article no.: 236435
Catalog no.: 194030
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 0100 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter | 10 mm | |
| Shank length | 40 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-CO5 | |
| Coating | uncoated | |
| Cutter diameter | 12.5 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | d11 | |
| Cutting edge length | 6 mm | |
| ISO milling cutter type | T-slot cutter | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 6 | |
| Number of corner versions | 2 | |
| Corner / edge | 1; 2 | |
| Corner version | sharp-edged; sharp-edged | |
| Corner radius | 0 mm; 0 mm | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal | |
| Interface | joint 1 | |
| Gauge length | 17 mm | |
| Usable length | 6 mm | |
| Overall length | 57 mm | |
| Functional length | 17 mm | |
| Weight | 30 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 4000-82 | |
| Colour ring | without | |
| Type of product | woodruff keyseating milling cutter, T-slot milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 6 mm |
Identification & Classification
| Article number | 236435 | |
| Catalog number | 194030 | |
| EAN / GTIN | 4045197109538 | |
| Manufacturer number | 194030 12,5X6 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
250
N
70
P
35
P
28
K
22
N
35
Description
Version:
The mill cuts on all three sides.
Due to alternate set teeth (staggered), high cutting performance is achieved.
Due to alternate set teeth (staggered), high cutting performance is achieved.
Note:
For milling T-slots to DIN 650 into machine tables on jigs and fixtures.