{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill HSS-PM, TiAlN, ⌀ e8 DC: 16mm
Article no.: 236533
Catalog no.: 191250
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL01601005 | |
| Holder shape | form B | |
| Holder version | metric | |
| Holder size, metric | 16 mm | |
| Dry machining | suitable | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter | 16 mm | |
| Oil | suitable | |
| Air | suitable | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS/PM TIALN | |
| Coating | TiAlN | |
| Cutter diameter | 16 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | e8 | |
| Neck shape | cylindrical | |
| Cutting edge length | 32 mm | |
| ISO milling cutter type | End / face mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters, peripheral side | 3 | |
| Number of effective cutters, end face | 3 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0 mm | |
| Corner chamfer angle | 90 degrees | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | the same | |
| Interface | joint 1 | |
| Gauge length | 34 mm | |
| Usable length | 32 mm | |
| Overall length | 92 mm | |
| Functional length | 34 mm | |
| Weight | 122 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Data carriers | without data carrier | |
| Machining method | End milling; slot milling | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 16 mm; 32 mm |
Identification & Classification
| Article number | 236533 | |
| Catalog number | 191250 | |
| EAN / GTIN | 4045197101174 | |
| Manufacturer number | 191250 16 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
25
M
18
K
55
N
110
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
For very high demands on the metal removal rate.
Eccentric relief ground.
For very high demands on the metal removal rate.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.