{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Straight shank taper pin drill, uncoated, ⌀ DC: 6mm
Article no.: 238459
Catalog no.: 116310
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Feed f | 0.05 mm/rev. | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00802005 | |
| Holder version | metric | |
| Holder size, metric | 8 mm | |
| Holder tolerance class | h8 | |
| Shank diameter DS | 8 mm | |
| Length of shank LS | 42 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Stiftloch-Kegelbohrer | |
| Cutter diameter, min. Dc min. | 5.9 mm | |
| Cutter diameter, max. Dc max. | 8.23 mm | |
| Configurable | no | |
| Flute length Lc | 115 mm | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Angle, 1st step | 118 degrees | |
| Type of drilling tool | pin hole drill | |
| Tool material | HSS | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length L1 | 105 mm | |
| Overall length L | 160 mm | |
| Weight | 41 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 1898 A | |
| Shape letter standard number | A | |
| Machining method | drilling into solid material (BVB) | |
| Colour ring | without | |
| Type of product | indexable drill | |
| Feed in | steel < 750 N/mm2 | |
| Content | single part |
Identification & Classification
| Article number | 238459 | |
| Catalog number | 116310 | |
| EAN / GTIN | 4045197029362 | |
| Manufacturer number | 116310 6 | |
| Article class | 11B | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
24
P
20
Description
Version:
Conically increasing cutting edges with chip breaker flutes on the circumference. Special surface treatment.
Advantage:
Conical holes 1:50 for taper pins to ISO 2339 (DIN 1) and ISO 8736 (DIN 7978) can be drilled in a single operation.
Note:
⌀1.5; 2; 2.5 available with plain shank on request.
⌀14;16; 20; 25 available with MT shank on request.
For finishing use taper pin reamers No. 161200.
⌀14;16; 20; 25 available with MT shank on request.
For finishing use taper pin reamers No. 161200.