{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Centre drill HSS R, uncoated, Nominal ⌀ DC k12: 2mm
Article no.: 239449
Catalog no.: 111350
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Zentrierbohrer HSS R | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00500105 | |
| Holder shape | Standard | |
| Arbor size | 0050 | |
| Shank diameter DS | 5 mm | |
| Cutter diameter, min. Dc min. | 2 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | k12 | |
| Distance from cutter corner to cutter tip | 0.6 mm | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 5 degrees | |
| Angle, 1st step | 118 degrees | |
| Countersink angle | 60 degrees | |
| Centre drill shape | R | |
| For min. workpiece diameter | 15 mm | |
| For max. workpiece diameter | 20 mm | |
| Type of drilling tool | centre drill, double-sided | |
| Product designation (type) | R | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 20 mm | |
| Usable length L1 | 5 mm | |
| Overall length L | 40 mm | |
| Weight | 5 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 333 | |
| Colour ring | without | |
| Type of product | centre drill | |
| Content | single part |
Identification & Classification
| Article number | 239449 | |
| Catalog number | 111350 | |
| EAN / GTIN | 4045197000644 | |
| Manufacturer number | 111350 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
N
45
P
40
P
30
P
25
P
10
P
8
N
80
Description
Version:
Ground from solid and relief ground, spiral fluted.
Centre drill with radius form R:
Centre drill with radius form R:
- The radius curve eliminates the sharp transition from drill point to countersink angle that is present on form A, so the risk of fracture is reduced.
- In the event of angular misalignment of the lathe centre, the ring bearing face avoids the component running only on the external or internal edge of the bearing face. Even if the lathe centres are not in line, good support is provided.