{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Roughing shell end mill HR, TiAlN, ⌀×width js16: 100X50mm
Article no.: 241514
Catalog no.: 182750
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Walzenstirn-Schruppfräser HR | |
| Cutter diameter Dc | 100 mm | |
| Body diameter D2 | 100 mm | |
| Diameter of mounting hole D3 | 32 mm | |
| Countersink diameter of mounting hole D4 | 24 mm | |
| Cutting width B | 50 mm | |
| Countersink depth, mounting hole | 1 mm | |
| ISO milling cutter type | shell end mills | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Plunge angle max. | 7.4 degrees | |
| Number of cutters (peripheral side) Z | 12 | |
| Number of cutters (end face) Z | 12 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner version | sharp-edged | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-E TIALN | |
| Coating | TiAlN | |
| Overall length L | 50 mm | |
| Weight | 500 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1880 T1 | |
| Machining method | face milling (FPL) | |
| Colour ring | without | |
| Type of product | shell end mills | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 20 mm; 50 mm |
Identification & Classification
| Article number | 241514 | |
| Catalog number | 182750 | |
| EAN / GTIN | 4045197097293 | |
| Manufacturer number | 182750 100X50 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
45
P
42
P
38
P
33
M
25
M
20
S
15
N
60
Description
Version:
Eccentric relief ground fine knuckle-type profile.
Optimum cutting edge geometry.
Optimum cutting edge geometry.
Note:
fz for ae = 0.5 - 1×D.