{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Slot drill HSS-Co8, uncoated, ⌀ e8 DC: 13mm
Article no.: 241883
Catalog no.: 191200
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01201005 | |
| Holder shape | straight clamping flat | |
| Holder version | metric | |
| Holder size, metric | 0120 mm | |
| Dry machining | suitable only under restricted conditions | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 12 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Coating | uncoated | |
| Cutter diameter Dc | 13 mm | |
| Tolerance of cutter diameter | manufacturer tolerance; tolerance class ISO | |
| Tolerance Class | e8 | |
| Cutting edge length Lc | 26 mm | |
| ISO milling cutter type | end / face mill | |
| Number of effective cutters (peripheral side) Z | 3 | |
| Number of effective cutters (end face) Z | 3 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Spacing of the cutters | the same | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Gauge length A | 28 mm | |
| Usable length L1 | 26 mm | |
| Overall length L | 83 mm | |
| Weight | 73 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 844 B | |
| Data carriers | without data carrier | |
| Colour ring | without | |
| Type of product | shoulder mill | |
| Correction factor fz | 1,25 | |
| Cutting depth min. | 0,01 mm | |
| Max. cutting depth L2 | 13 mm; 26 mm |
Identification & Classification
| Article number | 241883 | |
| Catalog number | 191200 | |
| EAN / GTIN | 4045197100849 | |
| Manufacturer number | 191200 13 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
30
P
25
P
23
K
23
N
55
Description
Version:
Centre cutting teeth for plunging.
Eccentric relief ground.
Eccentric relief ground.
Note:
Suitable for use as a slot drill (tolerance e8) or an end mill.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.
50 % higher metal removal rate than 2 flute slot drills.
Larger flutes than multi-flute end mills (good for soft material). For milling keyways.