{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Plug-in ratchet reversible, Type-Square drive: 1-1/2in
Article no.: 242594
Catalog no.: 657600
Article code:
Product details
Technical Data
| ESD protected area (EPA) | no | |
| Min. working angle | 6 degrees | |
| With hammer function | no | |
| Swivel handle provided | no | |
| Height | 24 mm | |
| Width | 33 mm | |
| Pitch | 17.5 mm | |
| Drive size | 9×12 | |
| Width across flats | 1/2 in | |
| EX area | no | |
| Type of product | ratchet | |
| Number of teeth (detent) | 60 | |
| Direction of rotation changed using | reversing disc | |
| With ejector | no | |
| Long-term rated loading | 100 Nm | |
| Drive | square profile | |
| Output drive | External square drive; external square drive; external square drive | |
| Telescopic function | no | |
| Material of tool | chrome alloy steel | |
| Surface of tool | chromium-plated over nickel | |
| Content | single part |
Identification & Classification
| Article number | 242594 | |
| Catalog number | 657600 | |
| EAN / GTIN | 4018754034529 | |
| Manufacturer number | 58250010 | |
| Manufacturer/responsible person | STAHLWILLE Eduard Wille GmbH, Lindenallee 27, 42349 Wuppertal, Germany, https://www.stahlwille.de |
Description
Version:
Drop-forged; all plug-in heads = Rectangular shank with spring retaining pin. This ensures a solid and secure fit of the plug-in head in the torque wrench.
Plug-in reversible ratchet.
Plug-in reversible ratchet.
Material:
Chrome alloy steel, non-flaking, chrome-plated over nickel.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Suitable for:
Torque wrench with rectangular sockets.
Note:
Please note the pitch of the plug-in head and match this to that of the adjustment tool (see test certificate/operating instructions of the torque wrench you are using). If these vary, correct the pitch!
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.
Further plug-in heads with rectangular plug-in shank 22 × 28 mm available on request.