{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High performance end mill, uncoated, ⌀ js12 DC: 9mm
Article no.: 243655
Catalog no.: 191850
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Hochleistungs-Schaftfräser | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL01201005 | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 12 mm | |
| Tool material | HSS Co 10 | |
| Cutting media, manufacturer’s designation | HSS-CO8 | |
| Coating | uncoated | |
| Cutter diameter Dc | 9 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | js12 | |
| Cutting edge length Lc | 25 mm | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 4 | |
| Number of effective cutters (end face) Z | 4 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Corner / edge | 1 | |
| Corner chamfer angle | 90 degrees | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 4 | |
| Interface | joint 1 | |
| Gauge length A | 35 mm | |
| Overall length L | 75 mm | |
| Weight | 116 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | shoulder milling (FEC) | |
| Colour ring | without | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 25 mm; 9 mm |
Identification & Classification
| Article number | 243655 | |
| Catalog number | 191850 | |
| EAN / GTIN | 4045197105462 | |
| Manufacturer number | 191850 9 | |
| Article class | 11W | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
83
P
28
P
23
P
23
K
23
N
55
Description
Version:
Multi-flute mills with ground chip breaker on flutes.
End cutting teeth for plunging.
Special surface treatment.
End cutting teeth for plunging.
Special surface treatment.
Advantage:
Applicable as finishing cutter with particularly high cutting performance.