{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
NC spotting drill HSS-E 90° N, uncoated, ⌀ DC h6: 20mm
Article no.: 244079
Catalog no.: 112000
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Manufacturer’s designation | NC-Anbohrer HSS-E | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL02001005 | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 20 mm | |
| Shank length LS | 0 mm | |
| Shank type | HB | |
| Cutter diameter, min. Dc min. | 20 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | h6 | |
| Flute length Lc | 40 mm | |
| Distance from cutter corner to cutter tip | 10 mm | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Helix angle, min. | 22 degrees | |
| Angle, 1st step | 90 degrees | |
| Product designation (type) | N | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Toleranzklasse | h6 | |
| Gauge length A | 81 mm | |
| Usable length L1 | 40 mm | |
| Overall length L | 131 mm | |
| Weight | 282 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Colour ring | without | |
| Type of product | spotting drill | |
| Content | single part |
Identification & Classification
| Article number | 244079 | |
| Catalog number | 112000 | |
| EAN / GTIN | 4045197001108 | |
| Manufacturer number | 112000 20 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
N
45
P
40
P
30
P
25
P
10
P
8
M
12
M
8
N
80
Description
Version:
≥ ⌀ 6 mm with drive flat to DIN 1835-B.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
Precision centred ground point with thin chisel edge - gives easy spot drilling and high accuracy of the centre hole form. Very sturdy due to short flutes.
Note:
Use speed for the actual hole ⌀
(not necessarily the speed for the drill outer ⌀).
(not necessarily the speed for the drill outer ⌀).