{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Metal circular saw blade fine, uncoated, ⌀×thickness: 80X2,5mm
Article no.: 244165
Catalog no.: 175000
Article code:
Click to enlarge image
Click to enlarge image
Arbors for saw blades ⌀ 20 - 100 mm see No. 345510 / 345555
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Metallkreissägeblatt fein, unbeschichtet, ⌀×Stärke: 80X2,5mm | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 80 mm; 80 mm | |
| Diameter of mounting hole | 22 mm; 22 mm | |
| Cutting width | 2.5 mm; 2.5 mm | |
| Hub width | 25 mm; 25 mm | |
| ISO milling cutter type | double-sided side milling cutter; double-sided side milling cutter | |
| Setting angle | 90 degrees; 90 degrees | |
| Relief angle | 0 degrees; 0 degrees | |
| Side rake angle | 0 degrees; 0 degrees | |
| Tooth form | Aw; Aw | |
| Number of cutters (peripheral side) | 80; 80 | |
| Tooth pitch | 3.14 mm; 3.14 mm | |
| Corner version | sharp-edged; sharp-edged | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Usable length | 23 mm | |
| Overall length | 2.5 mm | |
| Functional length | 25 mm | |
| Weight | 88 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1837 | |
| Shape letter standard number | A | |
| Data carriers | without data carrier | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade; circular saw blade | |
| Correction factor fz | 1.5 | |
| Max. cutting depth | 23 mm |
Identification & Classification
| Article number | 244165 | |
| Catalog number | 175000 | |
| EAN / GTIN | 4045197243034 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
P
37
P
22
P
20
P
15
M
11
M
11
K
27
N
400
Description
Version:
All blades are hollow ground to give side clearance. All sizes with 200 mm ⌀ and very thin blades have a bore collar for stabilisation. Accuracy, tooth form, and side clearance grinding according to DIN 1840.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
DIN 1837 A fine-toothed with raked teeth form A. Straight teeth with relatively small indentations.
Application:
For thin-walled components and small cutting depths.
Note:
The concentricity and axial run-out values are considerably better than the figures according to DIN 1840, in some cases by up to 50 %.