{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid lathe centre WS, Morse taper: 2
Article no.: 244241
Catalog no.: 323400
Article code:
Product details
Technical Data
| Overall length | 100 mm | |
| Head diameter | 18 mm | |
| Type of centring point | fixed | |
| Point angle | 60 degrees | |
| Mounting machine-side | MK2 | |
| With carbide tip | no | |
| Half centring point | yes | |
| Face-point distance | 2 mm | |
| Length of flattened area | 30 mm | |
| Use | turning | |
| Standard | DIN 806 | |
| Type of product | centring drill |
Identification & Classification
| Article number | 244241 | |
| Catalog number | 323400 | |
| EAN / GTIN | 4045197296610 | |
| Manufacturer number | 323400 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Point angle 60°, surfaces ground.
Full point of tool steel, through hardened.
Full point of tool steel, through hardened.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Standard:
DIN 806