{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Countersink, form D 60°, uncoated, ⌀ DC: 50mm
Article no.: 244413
Catalog no.: 150860
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | morse taper MT | |
| Interface coding | HOG-MKB3 | |
| Arbor size | 0030 | |
| Length of shank LS | 99 mm | |
| Cutter diameter, min. Dc min. | 16 mm | |
| Cutter diameter, max. Dc max. | 50 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Flute length Lc | 35.1 mm | |
| Taper length | 29.4 mm | |
| Number of teeth Z | 3 | |
| Twist direction | right-hand | |
| Helix angle, min. | 0 degrees | |
| Angle, 1st step | 60 degrees | |
| Pilot pin | without guiding pin | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 66 mm | |
| Usable length L1 | 66 mm | |
| Overall length L | 160 mm | |
| Weight | 650 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 334 | |
| Machining method | profile countersinking (SPR) | |
| Colour ring | without | |
| Type of product | countersink | |
| Content | single part |
Identification & Classification
| Article number | 244413 | |
| Catalog number | 150860 | |
| EAN / GTIN | 4045197087430 | |
| Manufacturer number | 150860 50 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
33
P
28
P
27
N
65
Description
Version:
The chip flutes are ground from solid up to size 31.5. Countersink point and circumference are relief ground and cut easily. This results in easy and chatter-free cutting for deep countersinking, as well as for deburring or countersinking.
Application:
For chatter-free countersinking and deburring.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.
Especially suitable for chamfering tapped holes and for countersinking in jig and tool making.