{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Side milling cutter, uncoated, ⌀×width js16×k11: 160X8mm
Article no.: 244885
Catalog no.: 185820
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 160 mm | |
| Diameter of mounting hole | 40 mm | |
| Cutting width | 8 mm | |
| ISO milling cutter type | double-sided side milling cutter | |
| Setting angle | 90 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of cutters (peripheral side) | 26 | |
| Tooth pitch | 19.35 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS-CO5 | |
| Coating | uncoated | |
| Overall length | 8 mm | |
| Functional length | 8 mm | |
| Weight | 720 g | |
| Cutting direction | right-hand cutting; neutral | |
| Standard | DIN 885 A | |
| Machining method | parting-off milling; slot milling | |
| Colour ring | without | |
| Type of product | side milling cutter | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 30 mm; 40 mm |
Identification & Classification
| Article number | 244885 | |
| Catalog number | 185820 | |
| EAN / GTIN | 4045197098139 | |
| Manufacturer number | 185820 160X8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
200
P
19
P
19
P
19
M
9
N
180
Description
Version:
Staggered teeth with collar and keyway.
Application:
For slotting or cutting-off when the side faces of the component must have an accurate and clean surface.
Note:
fz for ae = 0.1×D.