{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Re-adjustable hand reamer, Nominal ⌀ DC: 17mm
Article no.: 245478
Catalog no.: 160500
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | square mounting | |
| Shank length LS | 70 mm | |
| Cutter diameter 1st step min. DC | 17 mm | |
| Configurable | yes | |
| Cutting edge length LC | 67 mm | |
| Twist direction | left-hand | |
| Helix angle max. | 8 degrees | |
| Shank square □ | 12.5 mm | |
| Type of reaming tool | for through holes | |
| Type of drive | hand reamer | |
| Tool material | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 105 mm | |
| Overall length L | 175 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 859 | |
| Machining method | core drilling (BAB) | |
| Colour ring | without | |
| Type of product | cylindrical reamer | |
| Content | single part |
Identification & Classification
| Article number | 245478 | |
| Catalog number | 160500 | |
| EAN / GTIN | 4045197250728 | |
| Manufacturer number | 160500 17 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
P
P
P
Description
Version:
Up to 5 mm with straight flutes; from 6 mm with left hand helix 7 − 8°. The reamer body is slit and can be adjusted by approx. 1/100 of the reamer ⌀ using the expansion screw (e.g. 20 mm ⌀ = 0.2 mm).
Application:
For opening through holes to a slight oversize. Use the straight fluted reamers only in holes which are not interrupted. Make sure that the screw is not left tightened when stored.