{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Steel conduit tap, uncoated, PG: PG7
Article no.: 248029
Catalog no.: 133450
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 9 mm | |
| Length of shank LS | 48 mm | |
| Thread type | PG | |
| Nominal diameter of metric thread D | 12.5 mm | |
| Thread D | PG7 | |
| Thread pitch | 1.27 mm | |
| Turns per inch | 20 | |
| Chisel edge diameter | 10 mm | |
| Length of tapping part Lc | 22 mm | |
| Tap infeed length | 3.81 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 4 | |
| Twist direction | neutral, straight | |
| Twist angle | 0 degrees | |
| Type of thread-cutting tool | machine tap for conventional machining | |
| Taper lead form | D | |
| Recommended maximum drilling depth L2 | 37.5 mm | |
| Application for type of drilling | through hole; blind hole | |
| To depth (x diameter) | 3; 3 | |
| Number of clamping slots | 4 | |
| Core hole diameter | 11.4 mm | |
| Flank angle | 80 degrees | |
| Square-drive width across flats □ | 7 mm | |
| Tool material | HSS-E | |
| Cutting media, manufacturer’s designation | HSS-E | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 70 mm | |
| Overall length L | 70 mm | |
| Weight | 75 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 40432 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | without | |
| Type of product | taps |
Identification & Classification
| Article number | 248029 | |
| Catalog number | 133450 | |
| EAN / GTIN | 4045197074904 | |
| Manufacturer number | 133450 PG7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
M
6
N
13
Description
Application:
For use as machine tap or for cleaning existing threads by hand.
For steel conduit threads DIN 40430.
For steel conduit threads DIN 40430.
Note:
Shank produced according to DIN 40432.