{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap long, uncoated, M: M6
Article no.: 248397
Catalog no.: 131800
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable only under restricted conditions | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00452105 | |
| Holder shape | smooth shank with square drive | |
| Holder version | metric | |
| Holder size, metric | 4,5 mm | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 4.5 mm | |
| Length of shank LS | 81 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Maschinen-Gewindebohrer lang | |
| Thread type | M | |
| Nominal diameter of metric thread D | 6 mm | |
| Thread D | M6 | |
| Number of thread turns | 1 | |
| Thread pitch | 1 mm | |
| Thread tolerance class | ISO 2 6H | |
| Chisel edge diameter | 4.8 mm | |
| Length of tapping part Lc | 21 mm | |
| Tap infeed length | 3 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Type of thread-cutting tool | machine tap for conventional machining | |
| Taper lead form | A | |
| Application for type of drilling | through hole | |
| To depth (x diameter) | 2 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 5 mm | |
| Core hole diameter guideline value | 5 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | no | |
| Square-drive width across flats □ | 3.4 mm | |
| Normlänge L | 110 mm | |
| Tool material | HSS | |
| Machining group | K (cast iron); N (non-ferrous metals); P (steel) | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Usable length L1 | 12 mm | |
| Overall length L | 110 mm | |
| Weight | 15 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 357 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | without | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 248397 | |
| Catalog number | 131800 | |
| EAN / GTIN | 4045197070371 | |
| Manufacturer number | 131800 M6 | |
| Article class | 11H | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
13
P
15
P
15
K
9
Description
Version:
Long shank (with tapered shank ⌀ for greater operating depths).
Advantage:
Particularly suitable for tapping holes where access is difficult.