{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling ZDHT 150560FR-F10, for aluminium shoulder mills, HU7705
Article no.: 301301
Catalog no.: 211777
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | ZDHT 150560FR-F10 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | square | |
| Insert width | 9.31 mm | |
| Blade thickness | 5.56 mm | |
| Insert length | 16.46 mm | |
| Insert version | right-hand | |
| Cutting edge length | 16.46 mm | |
| Cutting edge height | 5.56 mm | |
| Corner radius | 6 mm | |
| Corner chamfer length | 3.5 mm | |
| Corner chamfer angle | 55 degrees | |
| Corner angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| ISO-Code | ZDHT 150560FR-F10 | |
| Type of chip breaker | MFP-GF | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Tool application group | N10 | |
| Cutting media, manufacturer’s designation | HU7705 | |
| Coating | uncoated | |
| Grade | HU7705 | |
| Insert thickness | 5.56 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | ZDHT150560 | |
| Interface coding for insert according to ISO TS 13399-60 | ZDHT150560 | |
| Insert designation | ZDHT 150560FR-F10 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | aluminium; non-ferrous materials (N) | |
| Tolerance Class | H | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 9 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 301301 | |
| Catalog number | 211777 | |
| EAN / GTIN | 4062406681968 | |
| Manufacturer number | 211777 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
2400
N
2200
N
1100
Description
Version:
Indexable inserts ground all round for a precise fit in the tool body. High-performance micro-grain substrate from the latest generation of tool materials. Optimised preparation of cutting edges for use in materials that are easy to machine.
Note:
Carrier modification (insert seats) is required before use.