{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide circular saw blade DIN 1838 B coarse, uncoated, ⌀×thickness: 30X0,4mm
Article no.: 312144
Catalog no.: 179820
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | VHM-Kreissägeblatt DIN 1838 B grob, unbeschichtet, ⌀×Stärke: 30X0,4mm | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Cutter diameter | 30 mm | |
| Diameter of mounting hole | 8 mm | |
| Cutting width | 0.4 mm | |
| ISO milling cutter type | double-sided side milling cutter | |
| Setting angle | 90 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Tooth form | Bs | |
| Number of cutters (peripheral side) | 40 | |
| Corner version | sharp-edged | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | uncoated | |
| Overall length | 0.4 mm | |
| Functional length | 7 mm | |
| Weight | 10 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 1838 | |
| Shape letter standard number | B | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Correction factor fz | 1.5 | |
| Max. cutting depth | 7 mm |
Identification & Classification
| Article number | 312144 | |
| Catalog number | 179820 | |
| EAN / GTIN | 4045197246813 | |
| Manufacturer/responsible person | Re-Bo REBER GmbH Spezialfabrik für Metallkreissäge, Ellwanger Straße 97, 73441 Bopfingen, Germany, www.re-bo.com |
Application Table
N
1200
N
700
P
200
P
140
P
140
P
90
P
40
M
110
M
100
S
90
K
125
N
400
N
600
Description
Version:
Top quality German product with precision toothing and hollow ground mirror finish sides. Compared to HSS saw blades, the cutting speed can be increased by a factor of 3 to 4.
DIN 1838 B coarse-toothed with curved teeth to form B with chisel edge. For cutting larger cross sections and greater cutting depths. These blades are suitable for more universal use due to the improved chip formation and larger gullets compared to the fine-toothed version.
DIN 1838 B coarse-toothed with curved teeth to form B with chisel edge. For cutting larger cross sections and greater cutting depths. These blades are suitable for more universal use due to the improved chip formation and larger gullets compared to the fine-toothed version.
Note:
- Stable conditions of machine and component clamping are important prerequisites. If these conditions are disregarded the circular saw blade may break.
- The values for radial run-out and axial run-out are considerably better than the values specified in DIN 1840.
- Special sizes on request.