{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of cut-resistant heat-resistant gloves, Glove size: 7
Article no.: 324749
Catalog no.: 094619
Article code:
Product details
Technical Data
| Manufacturer’s designation | HOLEX Schnitt- und Hitzeschutzhandschuh | |
| Heat-resistant up to | 250 degrees | |
| Contents pairs | 1 pair | |
| Cut protection class, EN 388 | C | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | X | |
| Tear propagation resistance | 3 | |
| Resistance to penetration | 1 | |
| Resistance to cuts (TDM) | C | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | X | |
| B: Contact heat, EN 407 | 2 | |
| C: Convection heat, EN 407 | X | |
| D: Radiated heat, EN 407 | X | |
| E: small molten spatters, EN 407 | X | |
| F: large molten spatters, EN 407 | X | |
| Material of coating, the palms of the hands | Nitrile | |
| EN 407 code | X2XXXX | |
| EN 388 code | 4X31C | |
| Colour | orange; black | |
| Type of product | gloves | |
| Area of application | heat protection; cut protection | |
| Glove size | 7 | |
| Scope of application | all-round | |
| Reuse | reusable | |
| Unit | pair | |
| Knitted technology (fineness) | 10G | |
| Standard | EN 388; EN 407; EN ISO 21420 | |
| Backing material | aramides; glass fibre; polyester | |
| Coating | the palms of the hands | |
| Characteristics | abrasion-proof; oil grip | |
| Content | pair |
Identification & Classification
| Article number | 324749 | |
| Catalog number | 094619 | |
| EAN / GTIN | 4062406773366 | |
| Manufacturer number | 094619 7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
HOLEX cut-resistant, heat-resistant gloves in 10-gauge knitting technology. Cut protection class C. Contact heat protection up to 250°C (maximum 15 seconds).
Standard:
EN 388; EN 407; EN ISO 21420
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- Protects hands from contact heat up to 250 °C.
- For work with hot and dry to slightly wet and oily workpieces.
Reasonably foreseeable misuse
- Do not wear when close to rotating machine parts.
- Offer no protection against chemical, microbiological or electrical hazards.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.