{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Ball nose slot drill HSS-PM, TiAlN, ⌀ e8 DC: 20mm
Article no.: 325797
Catalog no.: 194302
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Radiusfräser | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 20 mm | |
| Shank type | HB | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-PM TIALN | |
| Coating | TiAlN | |
| Cutter diameter Dc | 20 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class | e8 | |
| Cutting edge length Lc | 22 mm | |
| ISO milling cutter type | round profile mill | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of effective cutters (peripheral side) Z | 2 | |
| Number of effective cutters (end face) Z | 2 | |
| Twist direction | right-hand | |
| Twist angle | 30 degrees | |
| Radius R | 10 mm | |
| Direction of infeed | horizontal, oblique and vertical | |
| Interface | joint 1 | |
| Overall length L | 88 mm | |
| Cutting direction | left-hand cutting | |
| Tool version | solid steel | |
| Machining method | copy milling; profile milling (FPR) | |
| Colour ring | without | |
| Type of product | round profile mill | |
| Content | single part | |
| Correction factor fz | 1.25 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth L2 | 22 mm; 0.6 mm |
Identification & Classification
| Article number | 325797 | |
| Catalog number | 194302 | |
| EAN / GTIN | 4045197110213 | |
| Manufacturer number | 194302 20 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
138
N
110
P
83
P
64
P
64
P
37
P
32
M
23
M
18
K
55
N
110
Description
Version:
Centre cutting edge geometry for plunging.
For the most demanding metal removal rates.
For the most demanding metal removal rates.
Note:
For milling concave slots or for milling radius transitions.
Suitable for use as a copy mill and for mould making.
fz for ap 0.05×D.
Suitable for use as a copy mill and for mould making.
fz for ap 0.05×D.