{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Tap SteelHT machine tap HSS-E-PM Form C 6HX, TiAlN, M: M12
Article no.: 327716
Catalog no.: 135371
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00900105 | |
| Holder shape | smooth shank with square drive | |
| Holder version | metric | |
| Holder size, metric | 9 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h9 | |
| Shank diameter DS | 9 mm | |
| Oil | suitable | |
| Cooling lubricant | yes | |
| Series | Master Tap | |
| Manufacturer’s designation | GARANT Master Tap Steel HT Maschinen-Gewindebohrer | |
| Thread type | M | |
| Nominal diameter of metric thread D | 12 mm | |
| Thread D | M12x1,75-6HX | |
| Number of thread turns | 12 | |
| Thread pitch | 1.75 mm | |
| Thread tolerance class | ISO 2X 6HX | |
| Chisel edge diameter | 10.02 mm | |
| Length of tapping part Lc | 23.6 mm | |
| Tap infeed length | 4.38 mm | |
| Taper lead angle | 8 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Helical pitch | 45 mm | |
| Type of thread-cutting tool | machine tap for dynamic machining | |
| Taper lead form | C | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Application for type of drilling | blind hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 10.2 mm | |
| Core hole diameter guideline value | 10.2 mm | |
| Flank angle | 60 degrees | |
| Reinforced shank | no | |
| Stepped shank | yes | |
| Square-drive width across flats □ | 7 mm | |
| Normlänge L | 110 mm | |
| Tool material | HSS-E-PM | |
| Machining group | H (hard materials); M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Cutting media, manufacturer’s designation | HSS-E-PM | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Usable length L1 | 30 mm | |
| Overall length L | 110 mm | |
| Weight | 41 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 376 | |
| Data carriers | without data carrier | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | red | |
| Type of product | taps | |
| Content | single part |
Identification & Classification
| Article number | 327716 | |
| Catalog number | 135371 | |
| EAN / GTIN | 4062406236847 | |
| Manufacturer number | 135371 M12 | |
| Article class | 11I | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
30
P
20
P
15
P
12
H
5
H
15
H
5
M
7
S
5
Description
Version:
High-performance tap, specially developed for use in steels with high tensile strength and for difficult-to-machine materials. Sturdy design with optimised guide thread to avoid chips jamming.
- HSS-E-PM tool material – for very high cutting edge stability.
- Optimised honed cutting edges.
- TiAlN coating – for maximum wear protection.
Recommendation:
For TOOLOX and HARDOX materials we recommend deviating from the DIN data (see table) by selecting a larger tapping hole ⌀.
Note:
For TOOLOX and HARDOX materials: do not exceed the maximum thread depth 2×D!