{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
VCGT 220530 FN, HU7810, Type: ALU
Article no.: 328579
Catalog no.: 211861
Article code:
Product details
Technical Data
| Base form | rhombic | |
| Thickness of insert S | 5.56 mm | |
| Length of cutting edge l | 22.24 mm | |
| Height of cutting edge | 5.56 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 3 mm | |
| Corner angle | 35 degrees | |
| Rake angle | 25 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 7 degrees | |
| ISO-Code | VCGT 220530 FN | |
| Attachment hole diameter | 5.5 mm | |
| Type of chip breaker | FN | |
| Cutting depth, recommended working area, max. ap max | 15 mm | |
| Cutting depth ap, min. | 0.05 mm | |
| Tool material | HW-N30 | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | XS10 | |
| Coating | uncoated | |
| Grade | HU7810 | |
| Insert thickness T | 5.56 mm | |
| Insert designation | VCGT220530 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | aluminium | |
| Tolerance Class | G | |
| Machining method | countersinking (plunge milling) (FSE) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Number of potential uses | 2 pcs. | |
| Weight | 11 g | |
| Correction factor fz | 1 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 328579 | |
| Catalog number | 211861 | |
| EAN / GTIN | 4062406676841 | |
| Manufacturer number | 211861 ALU | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
1900
N
1900
N
500
N
400
N
100
Description
Version:
Fine-grain substrate, polished chip breaker steps − extreme reduction of the tendency to edge build-up.
Note:
ap max = 7 mm for roughing with ae = 1×D.