{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
DUO-LOCK HAIMER MILL HPC, AlTiN, ⌀ f9 D1: 20mm
Article no.: 329361
Catalog no.: 220312
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet minimum | suitable | |
| Max. cutting depth, Side milling | 15 mm | |
| Max. cutting depth, Full slot milling | 20 mm | |
| Wet maximum | suitable | |
| Eingriffsbreite max. ae | 1×D; 0,5×D | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Interface coding | SAH02000185 | |
| Dry machining | suitable | |
| Arbor size | DL20 | |
| Shank diameter DS | 14.5 mm | |
| Length of shank LS | 23.9 mm | |
| Oil | suitable | |
| Air | suitable | |
| Cooling lubricant | yes | |
| Series | DUO-LOCK HAIMER MILL | |
| Tool material | solid carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | N | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | AlTiN | |
| Interface | joint 1 | |
| Gauge length A | 15 mm | |
| Usable length L1 | 25 mm | |
| Overall length L | 48.9 mm | |
| Functional length | 25 mm | |
| Weight | 130 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Data carriers | without data carrier | |
| Cutter diameter D1 | 20 mm | |
| Tolerance class | f9 | |
| Neck diameter min. | 19.3 mm | |
| Cutting edge length L1 | 15 mm | |
| Head length L | 25 mm | |
| Functional length L1 | 25 mm | |
| Number of effective cutters (peripheral side) | 3 | |
| Number of effective cutters (end face) | 3 | |
| Twist direction | right-hand | |
| Helix angle | 36 degrees | |
| Machining method | circular milling (round milling) (FZI); shoulder milling (FEC); slot drilling (keyway cutting) (FNB); slot milling (FNU) | |
| Number of corner versions | 3 | |
| Corner chamfer angle | 90 degrees | |
| Width across flats SW | 16 mm | |
| Direction of infeed | horizontal; vertical | |
| Properties of helix angle | unequal spacing | |
| Machining strategy | HPC | |
| Content | single part | |
| Correction factor fz | 2 | |
| Cutting depth min. | 0.05 mm | |
| Cutting depth in use | Full slot milling; Side milling | |
| Type of product | end / face mill |
Identification & Classification
| Article number | 329361 | |
| Catalog number | 220312 | |
| EAN / GTIN | 4034221103345 | |
| Manufacturer number | DL20F2003UK2000SDA | |
| Article class | 26Y | |
| Manufacturer/responsible person | HAIMER GmbH, Weiherstraße 21, 86568 IGENHAUSEN, Germany, www.haimer.com |
Application Table
N
700
N
700
N
235
P
220
P
180
P
160
P
120
M
80
M
60
S
30
K
130
Description
Version:
DUO-LOCK HAIMER MILL: Can be used as a universal tool. Unique end face geometry for ramping and circular interpolation milling. First choice for applications with short overhangs. DUO-LOCK HAIMER MILL Power Series: First choice for applications with long overhangs and unstable clamping conditions. For particularly smooth running on long overhangs it is preferable to use solid carbide extensions.
Note:
Standard application values for slots milled from solid at apmax </= 0.5 × D.