{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Alternative article:
Article no.: 342439
Catalog no.: 9041
Article code:
Product details
Technical Data
| Tightening-turning moment | 49 | |
| a | 32 mm | |
| h1 | 76 mm | |
| Number of wire rope clamps | 4 | |
| d1 | M14 | |
| Nominal size (inch) | 16 | |
| s | 21 mm |
Identification & Classification
| Article number | 342439 | |
| Catalog number | 9041 | |
| EAN / GTIN | 2050000643620 |
Description
Version:
The wire rope clips are not suitable for use with spiral ropes. The use of these wire rope clips as a primary safety device in conveyor systems in mining, in rope drives of cranes or for end connections on sling ropes is excluded.
Technical Data:
Materials:
Clamping bracket: Steel, strength class 6.8
Clamping jaw: Cast iron
Hexagon nut: Steel, strength class 6
Surface finish:
Clamping jaws: galvanized
Bracket and nut: yellow chromated
Marking: NG - rope diameter, XB - approved manufacturer's mark
Safety requirements: Tensile test and tensile swell test according to DIN 13411-5
Clamping bracket: Steel, strength class 6.8
Clamping jaw: Cast iron
Hexagon nut: Steel, strength class 6
Surface finish:
Clamping jaws: galvanized
Bracket and nut: yellow chromated
Marking: NG - rope diameter, XB - approved manufacturer's mark
Safety requirements: Tensile test and tensile swell test according to DIN 13411-5
Note:
Temperature application range: -20° to +60°
Application Area:
Wire rope clips in accordance with DIN EN 13411-5 are intended for the production of detachable rope end connections that are subject to safety requirements. Safety requirements apply when the failure of a component could endanger persons or property.