{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wire rope clips DIN EN 13411-5 Strength class 6.8, clamping jaw galvanised Bracket and nut
Article no.: 636450
Catalog no.: 9041
Article code:
Product details
Technical Data
| Tightening-turning moment | 2 | |
| a | 12 mm | |
| h1 | 25 mm | |
| Number of wire rope clamps | 3 | |
| d1 | M5 | |
| Nominal size (inch) | 5 | |
| s | 8 mm |
Packaging units
| 1 Pack | 10 Pieces |
Identification & Classification
| Article number | 636450 | |
| Catalog number | 9041 | |
| EAN / GTIN | 7610106343920 | |
| Manufacturer number | 1341154501 | |
| Article class | QLB |
Description
Version:
The wire rope clips are not suitable for use with spiral ropes. The use of these wire rope clips as a primary safety device in conveyor systems in mining, in rope drives of cranes or for end connections on sling ropes is excluded.
Technical Data:
Materials:
Clamping bracket: Steel, strength class 6.8
Clamping jaw: Cast iron
Hexagon nut: Steel, strength class 6
Surface finish:
Clamping jaws: galvanized
Bracket and nut: yellow chromated
Marking: NG - rope diameter, XB - approved manufacturer's mark
Safety requirements: Tensile test and tensile swell test according to DIN 13411-5
Clamping bracket: Steel, strength class 6.8
Clamping jaw: Cast iron
Hexagon nut: Steel, strength class 6
Surface finish:
Clamping jaws: galvanized
Bracket and nut: yellow chromated
Marking: NG - rope diameter, XB - approved manufacturer's mark
Safety requirements: Tensile test and tensile swell test according to DIN 13411-5
Note:
Temperature application range: -20° to +60°
Application Area:
Wire rope clips in accordance with DIN EN 13411-5 are intended for the production of detachable rope end connections that are subject to safety requirements. Safety requirements apply when the failure of a component could endanger persons or property.