{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
simturn AX grooving insert, right-hand, L2 = 25.4 mm, ⌀ Dmin / w: 5,2/1,5mm
Article no.: 348248
Catalog no.: 270615
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Wet maximum | suitable | |
| Cooling lubricant | yes | |
| Series | simturn AX | |
| Manufacturer’s designation | AAKFX800 | |
| Width of insert B | 1.5 mm | |
| Insert version | right-hand | |
| Usable length L2 | 25.4 mm | |
| Centre-line offset f | 2.45 mm | |
| External diameter D | 5 mm | |
| for bores from Dmin | 5.2 mm | |
| Cutting depth ap, max. | 1 mm | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel) | |
| Coating | coated | |
| Type of product | cutter insert | |
| Direction of action | right-hand | |
| Suitable for material | brass; cast iron (K); stainless steel (M); steel (P) | |
| Machining method | plunging (ESE) | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Content | single part |
Identification & Classification
| Article number | 348248 | |
| Catalog number | 270615 | |
| EAN / GTIN | 2050002066557 | |
| Manufacturer number | A05.0150.25.52 GR X800 | |
| Article class | 24U | |
| Manufacturer/responsible person | SIMTEK Präzisionswerkzeuge GmbH, Christophstraße 18, 72116 MÖSSINGEN, Germany, www.simtek.com |
Application Table
N
400
N
240
P
180
P
130
M
100
M
70
S
40
K
110
N
210
Description
Version:
Coating: X800 (successor to coating GN39).
No corner radius (sharp-edged).
No corner radius (sharp-edged).