{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre high precision version Point angle 60°/30°, Morse taper: 3
Article no.: 353971
Catalog no.: 321100
Article code:
Product details
Technical Data
| Overall length | 167 mm | |
| Head diameter | 32.5 mm | |
| Type of centring point | tracking | |
| Point angle | 30 degrees; 60 degrees | |
| With push-off thread | no | |
| With clamping faces | no | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Usable length | 50 mm | |
| Max. workpiece weight | 280 kg | |
| Maximum radial run-out | 0.003 mm | |
| Half centring point | no | |
| Replaceable centring points included | no | |
| Use | grinding; turning | |
| Weight | 0.5 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 353971 | |
| Catalog number | 321100 | |
| EAN / GTIN | 2050002064553 | |
| Manufacturer number | TOP52GR42,0 |
Description
Version:
- Extremely slim body and high concentricity.
- Precision needle and thrust bearings result in a maximum variation of 0.003 mm and a very small body ⌀.
- Taper and chamfered parts are made of hardened bearing steel (61−63 Rockwell).
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For turning and grinding where a small head ⌀ and high accuracy are required.