{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master INOX burr, coated coarse, Carbide AlTiN, Type: C0820
Article no.: 355388
Catalog no.: 547500
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | GARANT Master Inox | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Shank diameter | 6 mm | |
| Shank length | 40 mm | |
| Oil | suitable | |
| Air | suitable | |
| Tool material | solid carbide | |
| Machining group | M (stainless steel); N (non-ferrous metals); S (difficult-to-machine materials) | |
| Coating | AlTiN | |
| Cutter diameter | 8 mm | |
| Cutting edge length | 20 mm | |
| Head length | 20 mm | |
| Twist direction | right-hand | |
| Burr shape | cylindrical burr with radius end | |
| Type of cut | single toothing | |
| Toothing grit designation | coarse | |
| Interface | joint 1 | |
| Usable length | 20 mm | |
| Overall length | 60 mm | |
| Functional length | 20 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Type of product | burr |
Identification & Classification
| Article number | 355388 | |
| Catalog number | 547500 | |
| EAN / GTIN | 4062406774288 | |
| Manufacturer number | 547500 C0820 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
The innovative tooth geometry permits very high metal removal rates combined with smooth cutting and good guidance accuracy. Outstanding chip formation and surface results, low heat input into the material (no tempering colouration). Shank ⌀ 6mm.
The newly developed innovative tooth geometry permits high metal removal rates combined with extremely smooth running and very good guidance. The optimum chip formation (no pointed chips) achieves high surface quality in roughing and finishing applications.
With high-performance coating for longer tool life, less heat input, better chip evacuation.
GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
The newly developed innovative tooth geometry permits high metal removal rates combined with extremely smooth running and very good guidance. The optimum chip formation (no pointed chips) achieves high surface quality in roughing and finishing applications.
With high-performance coating for longer tool life, less heat input, better chip evacuation.
- High material removal rate.
- Smooth running.
- High-performance coating for low thermal stress, longer tool life, and improved chip evacuation.
- State-of-the-art substrate optimised for stainless steel materials.
- Maximum tool life.
GARANT burrs are manufactured from high performance carbide grades with high wear resistance and maximum cutting edge strength, using only the latest CNC machines. Steel shanks are used when the head diameter is larger than the shank diameter, otherwise they are made from solid carbide.
Application:
Optimised for use on austenitic, rust-resistant and acid-resistant steels, soft titanium alloys and non-ferrous metals.
Suitable for use with power tools and industrial robots on all stainless steel materials. For deburring, edge breaking, cleaning, weld and surface preparation.
Suitable for use with power tools and industrial robots on all stainless steel materials. For deburring, edge breaking, cleaning, weld and surface preparation.
Note:
Materials with poor heat conductivity; reduce speed to avoid overheating of the burr and smearing.