{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Measuring stand with fine adjustment at the magnetic base, Type: N1
Article no.: 358524
Catalog no.: 441195
Article code:
Click to enlarge image
Click to enlarge image
Fine adjustment at the magnetic base
Click to enlarge image
Product details
Technical Data
| Colour | grey; black | |
| Arms move freely | no | |
| Column arm ⌀ D2 | 14 mm | |
| Cross arm ⌀ D1 | 12 mm | |
| Length of column arm | 203 mm | |
| Length of cross arm | 185 mm | |
| Connection | thread | |
| Size of connection thread, thread | M8 | |
| Alignment of connection, thread | at the side | |
| Magnetic foot | yes | |
| Magnetic base width | 50 mm | |
| Magnetic base length | 60 mm | |
| Magnetic base height | 55 mm | |
| Magnetic force | 800 N | |
| Min. pull-out length | 20.3 cm | |
| Max. pull-out length | 20.3 cm | |
| Clamping force generation | mechanical | |
| Stand type | column stand | |
| Type of product | measuring stand |
Identification & Classification
| Article number | 358524 | |
| Catalog number | 441195 | |
| EAN / GTIN | 7290005398902 | |
| Manufacturer number | PH2040 | |
| Article class | 46G |
Description
Version:
3-point clamping of the measuring arm with very short clamping travel for high ease of use. Very low applied force generates sustained stable clamping.
Generously dimensioned frame for very high system stiffness. Vario dial indicator holder for shank ⌀ 6 mm, 8 mm, 3/8 inch, lever dial indicators with dovetail slide and indicators with loop on the rear.
Fine adjustment at the magnetic base. Advantage when adjusting µm lever dial indicators, as the column is not affected by the force applied.
Generously dimensioned frame for very high system stiffness. Vario dial indicator holder for shank ⌀ 6 mm, 8 mm, 3/8 inch, lever dial indicators with dovetail slide and indicators with loop on the rear.
Fine adjustment at the magnetic base. Advantage when adjusting µm lever dial indicators, as the column is not affected by the force applied.
Optional extras:
Measuring microscope No. 440401.