{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide-tipped hammer drill, SDS-max, ⌀ × Overall length: 35X570mm
Article no.: 360009
Catalog no.: 789200
Article code:
Click to enlarge image
Click to enlarge image
Three-piece carbide head (from ⌀ 35 mm)
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Cooling lubricant | no | |
| Interface position | on the machine | |
| Holder type | SDS-Max | |
| Cutter diameter, min. Dc min. | 35 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Flute length Lc | 450 mm | |
| Number of teeth Z | 2 | |
| Twist direction | right-hand | |
| Angle, 1st step | 130 degrees | |
| Tool material | Carbide | |
| Interface | joint 1 | |
| Usable length L1 | 450 mm | |
| Overall length L | 570 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | drilling into solid material (BVB) | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 360009 | |
| Catalog number | 789200 | |
| EAN / GTIN | 4002395374489 | |
| Manufacturer number | 4932352790 | |
| Manufacturer/responsible person | Techtronic Industries Central Europe GmbH, Walder Straße 53, 40724 Hilden, Germany, www.milwaukeetool.de |
Description
Version:
Special carbide insert geometry for longer tool lives.
Sharper angled tip: More precise drilling, no slipping on the surface, aggressive drilling in concrete steel and faster drilling speed. PGM certified – verified precise and wall-plug-capable drill holes, both for chemical and for physical anchors. Large flute channels for quick evacuation of waste material, resulting in less friction.
Drill head with square cross section from ⌀ 16 mm.
Sharper angled tip: More precise drilling, no slipping on the surface, aggressive drilling in concrete steel and faster drilling speed. PGM certified – verified precise and wall-plug-capable drill holes, both for chemical and for physical anchors. Large flute channels for quick evacuation of waste material, resulting in less friction.
Drill head with square cross section from ⌀ 16 mm.
Application:
For drilling concrete, natural stone, and masonry.
Note:
When using long drills > 500 mm, first drill a pilot hole at least 150 mm deep with a shorter drill (preferably of the same ⌀).