{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade, metal, alternating teeth with bevel universal, Blade ⌀ D: 300mm
Article no.: 370428
Catalog no.: 584095
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Hole circle diameter, 1 | 42 | |
| Hole circle diameter, 2 | 60 | |
| Hole circle diameter, 3 | 63 | |
| Hole circle diameter, 4 | 64 | |
| Wet minimum | suitable | |
| Number of holes, 1 | 2 | |
| Number of holes, 2 | 2 | |
| Number of holes, 3 | 2 | |
| Number of holes, 4 | 2 | |
| Wet maximum | suitable | |
| Diameter of driver hole, 1 | 7 | |
| Diameter of driver hole, 2 | 10 | |
| Diameter of driver hole, 3 | 11 | |
| Diameter of driver hole, 4 | 12 | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 300 mm | |
| Diameter of mounting hole | 30 mm | |
| Cutting width | 2.4 mm | |
| ISO milling cutter type | double-sided side milling cutter | |
| Tooth form | Wz | |
| Number of cutters (peripheral side) | 60 | |
| Tooth pitch | 15.7 mm | |
| Corner version | as chamfer | |
| Number of diameters of hole circle | 4 | |
| Index of hole circle | 1; 2; 3; 4 | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals); P (steel) | |
| Coating | uncoated | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade |
Identification & Classification
| Article number | 370428 | |
| Catalog number | 584095 | |
| EAN / GTIN | 4045197220974 | |
| Manufacturer number | 584095 300 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Tipped with carbide inserts, precision version with high-strength blade, noise damped. Generously dimensioned carbide teeth allow multiple re-grinding.
Application:
For circular, cross-cut, compound, and mitre saws.
Universal circular saw blade for cutting a wide range of materials such as steel flats and angle sections, aluminium and other non-ferrous metals. Flat teeth with bevel up to ⌀ 250 mm; alternating set with bevel from ⌀ 300 mm.
Universal circular saw blade for cutting a wide range of materials such as steel flats and angle sections, aluminium and other non-ferrous metals. Flat teeth with bevel up to ⌀ 250 mm; alternating set with bevel from ⌀ 300 mm.
Note:
Further circular saw blades can be found in Group 17.