{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque wrench 730N with Quick Select, with scale with square drive plug-in head, maximum torque: 100N·m
Article no.: 370513
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
QuickSelect quick adjustment
Click to enlarge image
Click to enlarge image
Beschreibung der Legende siehe Beschreibungstext.
Product details
Identification & Classification
| Article number | 370513 | |
| Catalog number | 657092 | |
| EAN / GTIN | 7612908692671 | |
| Manufacturer number | 657092 100 | |
| Article class | 63A |
Description
Version:
Units of measure: Nm, lbfft.
Advantage:
- Ergonomically shaped two-component handle, resistant to aggressive liquids such as fuel, Skydrol etc.
- The adjustment scale is placed behind a sight glass for protection against dirt and damage.
- Quick, precise, and reliable setting: Pull the setting knob, “Twist” to set the desired value and “Press” to save it. Setting knob moves easily since there is no spring pressure to be overcome.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
Since the set torque can be varied, it is ideal for repairs and short series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.