{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Torque wrench 730N with Quick Select, with scale without plug-in head, maximum torque: 200N·m
Article no.: 370520
Catalog no.: 657094
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
QuickSelect quick adjustment
Click to enlarge image
Click to enlarge image
QuickRelease:secure location and quick change-over of any plug-in heads with QuickRelease safety locking. The rectangular socket allows use of a wide variety of plug-in heads.
Click to enlarge image
QuickRelease:secure location and quick change-over of any plug-in heads with QuickRelease safety locking. The rectangular socket allows use of a wide variety of plug-in heads.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Click to enlarge image
Beschreibung der Legende siehe Beschreibungstext.
Product details
Technical Data
| Series | MANOSKOP® 730N | |
| Lever length including factory calibration reference dimension l3 | 449 mm | |
| Lever length without plug-in head l1 | 424 mm | |
| Adjusted reference dimension on the torque wrench l2 | 25 mm | |
| Width of output part | 28 mm | |
| Height of output part | 23 mm | |
| Adjustable trigger value | adjustable | |
| Unit of measure for torque | Nm; lbf ft | |
| Min. torque, Nm | 40 | |
| Min. torque, lbf ft | 30 | |
| Max. torque, Nm | 200 | |
| Max. torque, lbf ft | 150 | |
| Setting the trigger value | with adjustment scale | |
| Socket for plug-in head | 14×18 mm | |
| Torque unit | Nm; lbf ft | |
| Data can be recorded | no | |
| Trigger principle | mechanical short travel release | |
| Trigger signal | acoustic; haptic | |
| Feedback | triggering | |
| Content | single part | |
| Can be calibrated | yes | |
| Type of product | torque wrenches | |
| Direction of tightening | right-left | |
| Shape of connection | for plug-in heads (rectangular socket) | |
| DIsplay | analogue | |
| Torque range min. | 40 Nm | |
| Torque range max. | 200 Nm | |
| Torque accuracy clockwise | 3 % | |
| Torque accuracy anti-clockwise | 3 % | |
| Manufacturer’s test certificate | yes | |
| Messtechnik | mechanical | |
| Standard | DIN EN ISO 6789 | |
| Overall length L | 467 mm | |
| Total weight | 1’264 g | |
| Maßeinheit Skalenteilung | Nm | |
| Skalenteilung 1 Teilstrich | 1 Nm | |
| Messfunktionen | torque |
Identification & Classification
| Article number | 370520 | |
| Catalog number | 657094 | |
| EAN / GTIN | 4018754139545 | |
| Manufacturer number | 50181020 | |
| Article class | 63A | |
| Manufacturer/responsible person | STAHLWILLE Eduard Wille GmbH, Lindenallee 27, 42349 Wuppertal, Germany, https://www.stahlwille.de |
Description
Version:
Units of measure: Nm, lbfft.
Advantage:
- Ergonomically shaped two-component handle, resistant to aggressive liquids such as fuel, Skydrol etc.
- The adjustment scale is placed behind a sight glass for protection against dirt and damage.
- Quick, precise, and reliable setting: Pull the setting knob, “Twist” to set the desired value and “Press” to save it. Setting knob moves easily since there is no spring pressure to be overcome.
Function:
If the set value is reached while using the wrench, the wrench triggers giving a “signal” (acoustic and perceptible) and is then immediately ready for use again.
Application:
Since the set torque can be varied, it is ideal for repairs and short series production.
Standard:
Tested to DIN EN ISO 6789.
Cutting data:
Legend for drawing and formula:
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
l1 = Lever length without plug-in head
l2 = Adjusted reference dimension on the torque wrench
l3 = Lever length including factory calibration reference dimension
l4 = Reference dimension of the plug-in head
L = Total length of the tool
T1 = Torque to be set
T2 = Specified torque
Note:
The guaranteed measuring accuracy of the torque is achieved only once the torque range has been calibrated to DIN EN ISO 6789.