{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Nail anchor FNA II 6 x 30/15
Article no.: 379426
Catalog no.: 4822
Article code:
Product details
Technical Data
| d0 | 6 mm | |
| Material grade sleeve | Other | |
| Material | Galvanised steel | |
| min. anchorage depth | 30 mm | |
| h2 | 55 mm | |
| Ø | 13 mm | |
| Professional / DIY | Profi | |
| Environment | Inside | |
| With thread | No | |
| Sleeve material | Steel | |
| Packing | Folding box | |
| Max. thickness of the attachment | 15 mm | |
| l | 52.5 mm | |
| Surface protection sleeve | Galvanic/electrolytic zinc plated | |
| Test marks / approvals | Fire classification | |
| Self-drilling | No |
Packaging units
| 1 Pack | 50 Pieces | |
| 1 Pallet | 2600 Pieces |
Identification & Classification
| Article number | 379426 | |
| Catalog number | 4822 | |
| EAN / GTIN | 4048962202977 | |
| Manufacturer number | 530419 | |
| Article class | RMC |
Description
Advantage:
- The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
- The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
- The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
- A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
Application Area:
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and nonious hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Application Notes:
- The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and H
are suitable for pre-positioned installation. - The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
- Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.