{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Highbond-anchor stainless A4 FHB II-A S M12x75/40
Article no.: 380070
Catalog no.: 4010
Article code:
Product details
Technical Data
| Version | Mit Außengewinde | |
| d0 | 12 mm | |
| SW | 19 mm | |
| Application conditions | Damp area / Outside | |
| Material | Stainless steel | |
| Building material | cracked concrete | |
| Fire protection relevant | Yes | |
| M | M12 | |
| Scale elements mortar | 4 | |
| With mortar cartridge | No | |
| Professional / DIY | Profi | |
| Packing | Folding box | |
| Anchoring depth | 75 mm | |
| Max. thickness of the attachment | 40 mm | |
| l | 147 mm | |
| Test marks / approvals | Fire classification | |
| Drill hole depth h1 | 90 mm |
Packaging units
| 1 Pack | 10 Pieces | |
| 1 Pallet | 1040 Pieces |
Identification & Classification
| Article number | 380070 | |
| Catalog number | 4010 | |
| EAN / GTIN | 4006209976371 | |
| Manufacturer number | 97637 | |
| Article class | RMQ |
Description
Advantage:
- The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing.
- With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required.
- The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications.
- The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
Application Area:
Approved for:
Suitable for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
Suitable for:
- Façades
- Staircases
- Steel brackets
- Masts
- Rash protection
- Steelwork constructions
- Timber constructions
- Push-through installation
Application Notes:
- The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
- With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt.
- The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
- When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.