{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Highbond-anchor A4 FHB II-A L M12x120/60
Article no.: 380109
Catalog no.: 4009
Article code:
Product details
Technical Data
| Version | con filettatura esterna | |
| With mortar cartridge | No | |
| Professional / DIY | Profi | |
| Application conditions | Damp area / Outside | |
| Material | Stainless steel | |
| Building material | cracked concrete | |
| Packing | Folding box | |
| Anchoring depth | 120 mm | |
| Max. thickness of the attachment | 60 mm | |
| Fire protection relevant | Yes | |
| Scale elements mortar | 7 | |
| Test marks / approvals | Fire classification | |
| Drill hole depth h1 | 135 mm |
Packaging units
| 1 Pack | 10 Pieces | |
| 1 Pallet | 1560 Pieces |
Identification & Classification
| Article number | 380109 | |
| Catalog number | 4009 | |
| EAN / GTIN | 4006209976241 | |
| Manufacturer number | 97624 | |
| Article class | RMQ |
Description
Advantage:
- The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
- The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
- The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
- No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
- When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.
Application Area:
- Façades
- Staircases
- Steel brackets
- Machines
- Silo installations
- Masts
- Rash protection
- Steelwork constructions
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
Application Notes:
- The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
- When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
- The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
- The styrene-free vinyl ester mortar fully seals the drill hole.
- When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.