{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Quatron® indexable drill with ABS® shank, for indexable inserts SOEX
Article no.: 381177
Catalog no.: 235505
Article code:
- Drill depth for indexable insert drill up to: 3×D
- Shank: ABS
- Use for drilling: Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex
- Through-coolant: yes
Product details
Technical Data
| Series | KUB Quatron® | |
| Nominal ⌀ DC | 14 mm | |
| Drill depth for indexable insert drill up to | 3×D | |
| Shank | ABS | |
| Use for drilling | Centre drilling; limited cross-drilling; oblique spot drilling; Cross-drilling; Centre drilling; Aperture; oblique exit; convex | |
| Through-coolant | yes | |
| Reach L1 | 42 mm | |
| Overhang LA | 77 mm | |
| ABS® shank ⌀ Ds | 50 mm | |
| ISO code indexable insert | SOEX 050204 13-.. | |
| Set of insert screws | 239652 6IP1 (0.6 Nm) | |
| Number of cutting edges Z | 1 | |
| Overall length L | 108 mm | |
| Type of product | Indexable drill |
Identification & Classification
| Article number | 381177 | |
| Catalog number | 235505 | |
| EAN / GTIN | 4047109090699 | |
| Manufacturer number | U11 51402 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Description
Version:
With ABS® shank.
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
For use only under stable machining conditions.
Offset-axis drilling is possible up to Vmax = 0.25 mm, e.g. with eccentric adjusting unit No. 239010 − 239012.
Maximum ⌀ = D+0.5 mm achievable by offsetting.
Further sizes available on request.
Offset-axis drilling is possible up to Vmax = 0.25 mm, e.g. with eccentric adjusting unit No. 239010 − 239012.
Maximum ⌀ = D+0.5 mm achievable by offsetting.
Further sizes available on request.