{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
KOMET® Indexable insert, BK7710, Designation type W83: 18-210
Article no.: 381227
Catalog no.: 236554
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Insert width | 6.35 mm | |
| Insert length | 6.35 mm | |
| Insert version | neutral | |
| Cutting edge length | 6.35 mm | |
| Cutting edge height | 3.18 mm | |
| Insert diameter | 6.35 mm | |
| Corner radius | 0.6 mm | |
| Corner chamfer length | 0 mm | |
| Corner angle | 90 degrees | |
| Rake face chamfer angle | 0 degrees | |
| ISO-Code | SOEX 060306 | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | P25-P40, K20-K30, M20-M30 | |
| Cutting media, manufacturer’s designation | BK7710 | |
| Coating | PVD | |
| Grade | BK7710 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | drilling into solid material (BVB) | |
| Finishing / roughing assignment | Roughing | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Weight | 1.2 g | |
| Content | 10 pcs. |
Identification & Classification
| Article number | 381227 | |
| Catalog number | 236554 | |
| EAN / GTIN | 4047109085589 | |
| Manufacturer number | W83 18210.067710 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Application Table
N
600
N
300
N
250
S
80
N
300
N
150
Description
Version:
Ground on the circumference, with rounded cutting edge and sintered chip breaker.
Note:
Application values refer to the KUB Quatron®.
Do not use in the centre pocket of indexable drills!
Do not use in the centre pocket of indexable drills!