{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Shrink-fit chuck, HSK-A 63 short, Clamping range ⌀ D1: 14mm
Article no.: 385384
Catalog no.: 308170
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Holder type | hollow shank taper HSK | |
| Interface coding | HSK06300195 | |
| Holder shape | with internal centring | |
| Holder version | dimensionless nominal size with cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot | |
| Shank length | 32 mm | |
| Min. clamping diameter | 14 mm | |
| Max. clamping diameter | 14 mm | |
| Gauge length | 90 mm | |
| External diameter, tool-end | 27 mm | |
| Taper angle | 4.5 degrees | |
| Max. speed | 25,000 min-1 | |
| Concentricity | 3 µm | |
| Balance quality G at rotational speed | g 2.5 at 25,000 rpm | |
| Machining strategy | HPC; HSC | |
| Format | short | |
| Vibration damping | no | |
| Tool pull-out protection | no | |
| Pendular compensation | no | |
| Incl. length adjustment screw | yes | |
| Adjustment travel | 10 mm | |
| With tapped holes for balancing | yes | |
| Incl. RFID data carrier | no | |
| With cooling channel bore | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | shrink-fit chuck | |
| Overall length | 122 mm | |
| Overall height | 34 mm | |
| Overall width | 34 mm | |
| Standard | DIN 69893; ISO 12164-1 | |
| Shape | A | |
| With hole for RFID data carrier | yes | |
| Through-coolant available | yes | |
| Material | heat-treatable steel | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 385384 | |
| Catalog number | 308170 | |
| EAN / GTIN | 4045197290809 | |
| Manufacturer number | 308170 14 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-temperature steel.
- Sizes 3 − 5 for carbide, from size 6 for HSS and carbide.
- With RFID/Balluffchip bore.
GARANT: HSK mating faces machined. All shanks hard turned (for smooth running!).
From clamping ⌀ D1 6 mm with tapped holes for balancing screws.
Integral length adjustment of the tool from clamping ⌀ D1 6 mm (adjustment travel 10 mm).
Application:
- For holding end mills and drills with parallel shank to h6 tolerance.
- Suitable for inductive, contact and hot air shrink-fit units.
Supplied with:
For chucks with length adjustment including a length adjustment screw (from clamping ⌀ D1 6 mm).