{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack solid carbide milling cutter with chip separators TPC, 5 pieces
Article no.: 386680
Catalog no.: GG3109
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter | 6 mm | |
| Shank length | 39 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | solid carbide | |
| Machining group | M (stainless steel) | |
| Coating | TiAlN | |
| Cutter diameter | 4 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | f8 | |
| Body diameter | 3.9 mm | |
| Cutting edge length | 16 mm | |
| ISO milling cutter type | End / face mill | |
| Number of effective cutters, peripheral side | 5 | |
| Number of effective cutters, end face | 5 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.08 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Number of chip separators | 5 | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 5 | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 23 mm | |
| Usable length | 16 mm | |
| Overall length | 62 mm | |
| Functional length | 23 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | End milling; slot milling | |
| Colour ring | blue | |
| Machining strategy | TPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 2 | |
| Cutting depth min. | 0.08 mm | |
| Max. cutting depth | 16 mm |
Identification & Classification
| Article number | 386680 | |
| Catalog number | GG3109 | |
| EAN / GTIN | 4067263102380 | |
| Manufacturer number | GG3109 4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
380
P
340
P
300
P
230
M
240
M
170
Description
Version:
Same as No. 203109.
High-performance milling cutter with irregular cutter spacing and irregular helical pitch. Optimised bending strength due to the use of ultra-fine grain substrates. Chip breakers for controlled chip breaking.
High-performance milling cutter with irregular cutter spacing and irregular helical pitch. Optimised bending strength due to the use of ultra-fine grain substrates. Chip breakers for controlled chip breaking.
Note:
hmax: The values stated in the table are maximum values.
ae max= 0.07×D for TPC machining.
ae max= 0.07×D for TPC machining.