{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Nail anchor with Nail head stainless steel FNA II 6x30/5-A4
Article no.: 396937
Catalog no.: 4830
Article code:
Product details
Identification & Classification
| Article number | 396937 | |
| Catalog number | 4830 | |
| EAN / GTIN | 4006209441220 | |
| Manufacturer number | 44122 | |
| Article class | RMM |
Description
Advantage:
- The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
- The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
- The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
- A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
Application Area:
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and nonious hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Application Notes:
- The FNA II with nail head is suitable for push-through installation. The FNA II M6 is suitable for pre-positioned and pushthrough installation. The FNA II OE and H
are suitable for pre-positioned installation. - The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the drill hole wall.
- Available setting tools:
FNA S-SBO to slip onto the drill,
FNA S-SDS for series installation with a drilling hammer,
FNA S-H for the manual installation of mounting rails.