{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Drop-in anchor galvanized steel EA II M16x65
Article no.: 401912
Catalog no.: 4995
Article code:
Product details
Technical Data
| Internal thread | M16 | |
| Professional / DIY | Profi | |
| Material grade sleeve | Other | |
| Environment | Inside | |
| Material | Galvanised steel | |
| min. anchorage depth | 65 mm | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Packing | Folding box | |
| Suitable for natural stone | Ja | |
| min. drill hole depth for pre-installation | 70 mm | |
| Suitable for concrete | Ja | |
| Test marks / approvals | Fire classification | |
| Self-drilling | No |
Packaging units
| 1 Pack | 20 Pieces | |
| 1 Pallet | 3200 Pieces |
Identification & Classification
| Article number | 401912 | |
| Catalog number | 4995 | |
| EAN / GTIN | 4006209484081 | |
| Manufacturer number | 48408 | |
| Article class | RMC |
Description
Advantage:
- The embossed edge prevents the anchor sleeve from slipping, thus allowing trouble-free hammerset installation.
- The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
- The machine setting tool EMS allows for effortless installation, particularly in the case of series installations.
- The embossing that is applied when expanding with the Setting tool EHS Plus offers a simple control of the anchoring and provides increased safety.
- Fixing point on hef 25 mm against inadvertent of the anchor before expansion.
- Ideal for applications with high load requirements.
Application Area:
- Sprinkler systems
- Steel constructions
- Machines
- Consoles
- Shuttering props
Suitable for:
- Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
- The EA II is suitable for pre-positioned installation.
- Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer.
- The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall.
- The setting tools must sit on the rim of the anchor to ensure correct expansion.