{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pallet add-on rack, Depth 1100 mm, Height: 4500mm
Article no.: 409989
Catalog no.: 991217
Article code:
Click to enlarge image
Click to enlarge image
Basic rack and extension rack
Click to enlarge image
Application example
Click to enlarge image
Product details
Technical Data
| RAL colour | RAL 5017; RAL 2004 | |
| Coating | powder-coated | |
| Colour, blue | Traffic blue | |
| Colour, orange | Pure orange | |
| Part described | Ständer; Holme | |
| Number of storage levels | 4 | |
| Placing a pallet into storage | yes | |
| Number of pallet slots per bay | 12 | |
| To take pallets with load capacity | 820 kg | |
| Type of stile | LNS 110×50×1,5 | |
| Height of stile | 110 mm | |
| Frame profile | S625-A18 | |
| Number of profile frames | 1 | |
| Number of rack stiles | 1 | |
| Material | sheet metal | |
| Colour | blue; orange | |
| Type of product | pallet racking | |
| Height adjustment interval | 50 mm | |
| Width of compartment | 2,700 mm | |
| Depth of compartment | 1,100 mm | |
| Shelf load max. | 2,460 kg | |
| Bay load max. | 8,670 kg | |
| Delivery | completely in individual parts | |
| Type of installation | plug-in system | |
| Rack access | double-sided | |
| Rack installation | extension rack | |
| Nominal depth | 1,100 mm | |
| Nominal height | 4,500 mm | |
| External dimension width | 2,810 mm |
Identification & Classification
| Article number | 409989 | |
| Catalog number | 991217 | |
| EAN / GTIN | 4058255110261 | |
| Manufacturer number | 46922-N | |
| Manufacturer/responsible person | Gebr. Schulte GmbH & Co. KG, Zum Dümpel 22, 59846 Sundern, Germany, www.schulte-lagertechnik.com |
Description
Version:
Assembled size of extension rack: 2810 mm
Description:
Assembled size:
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Overall length of the rack:
For frame stiles S610-M18-U and S625-A18:
Nominal length + number of stiles × 86 mm (for S610-M18-U)
Nominal length + number of stiles × 110 mm (for S625-A18).
Colour:
Stiles similar to RAL 5017 traffic blue, cross beams similar to RAL 2004 pure orange powder-coated.
Note:
- On uneven floors we recommend additional shim plates.
- Supplied for self-assembly, saving freight costs. Delivered unassembled.
- Allow at least 100 mm for the foot plates between the frame stiles and walls or parts of the building.
When fitting cross-beams, make sure that the outer stiles project at least 500 mm above the topmost storage level. Within the row of racking, a projection of 100 mm is sufficient.
Technical provisions for erection of pallet racking according to BGR 234:
- End stiles adjacent to gangways and traffic routes must be at least 500 mm higher that the highest storage level.
- Pass-throughs and spans must be provided with a closure board (e.g. chipboard sheet).
- Clear pass-through height must be at least 2100 mm.
- End stiles and pass-throughs must be fitted with crash barriers.
- Single-sided racking that is free-standing in a room must be fitted with mesh rear panels to prevent stored goods falling out.
- Each row of racking must carry safe working load signs.
- Concrete grade: at least C20/25 to EN 206-1 (DIN 1045-2); concrete thickness at least 200 mm.
- If the distance between pallets in a double-sided rack is less than 100 mm, insertion stops should be provided.
Further information on planning and design:
- An important factor is the unsupported length (K) = the maximum distance between floor and the upper edge of the first cross-beam. The stile type is determined by this factor.
- Approx. 100 mm clearance should always be allowed to the next storage level, or the shop ceiling.
- Lift height of the handling equipment: Top of the uppermost cross beam plus 200 mm.
- All load specifications apply only to indoor installation. Earthquake loads and wind and snow loads are not taken into account and must be requested separately. Shelves that are to be installed in earthquake zones must be calculated and requested separately.