{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for drilling WOEX 05T304 S, for universal indexable drills, HB7635
Article no.: 414335
Catalog no.: 232620
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | WOEX 05T304 S | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular, with enlarged corner angles | |
| Thickness of the insert S | 3.8 mm | |
| Length of cutting insert L | 5.3 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 5.3 mm | |
| Height of cutting edge | 3.8 mm | |
| Diameter of the cutting insert d | 8 mm | |
| Corner radius R | 0.4 mm | |
| Corner angle | 84 degrees | |
| Normal clearance angle (main cutting edge) | 8 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | WOEX 05T304 S | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | Bohren | |
| Cutting media, manufacturer’s designation | HB7635 | |
| Coating | PVD | |
| Grade | HB7635 | |
| Insert thickness T | 3.8 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | WO05T3043N | |
| Interface coding for insert according to ISO TS 13399-60 | WO05T3043N | |
| Insert designation | WOEX 05T304 S | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 3 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | E | |
| Machining method | drilling into solid material (BVB) | |
| Finishing / roughing assignment | Roughing | |
| Machining strategy | MTC | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Weight | 5 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 414335 | |
| Catalog number | 232620 | |
| EAN / GTIN | 4045197346551 | |
| Manufacturer number | 232620 ST900 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
275
P
275
P
215
M
165
M
165
S
80
