{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Thermax thermal isolation module 12/110 M12 A4
Article no.: 417405
Catalog no.: 4928
Article code:
Product details
Technical Data
| Professional / DIY | Profi | |
| Anchor length | 245 mm | |
| Environment | Damp area / Outside | |
| Material | Stainless steel | |
| Approval / assessment | cracked concrete | |
| Surface protection | Untreated | |
| Building material | Concrete | |
| Drive | Hexagonal | |
| Packing | Folding box | |
| M | M12 | |
| Application | French balcony railings | |
| Test marks / approvals | ETA - European Technical Assessment |
Identification & Classification
| Article number | 417405 | |
| Catalog number | 4928 | |
| EAN / GTIN | 4006209515372 | |
| Manufacturer number | 51537 | |
| Article class | RMD |
Description
Advantage:
- When combined with the injection mortars FIS EM Plus, FIS V, FIS SB and FIS Green, the stand-off installation is approved for high loads in a range of materials. This allows for a secure fixing.
- Usage lengths of 62 to 170 mm can be covered with just one TherMax.
- The plastic cone creates a thermal barrier between the fixture and the inner fixture, and offers an energy-optimised fixing.
- The glass fibre reinforced plastic cone cuts its own way through the ETICS with a positive fit, and allows for a simple, fast and adjustable installation without the need for any special tools.
Supplied with:
10 x TherMax M12 R
10 x Sleeve 20 x 130
3 x Bit
3 x Cutting blade
3 x Manual
10 x Sleeve 20 x 130
3 x Bit
3 x Cutting blade
3 x Manual
Application Area:
Approved for:
For the thermally separated fixing of:
- Concrete, cracked and non-cracked
- Vertically perforated brick
- Hollow blocks made from lightweight concrete
- Perforated sand-lime brick
- Solid sand-lime brick
- Solid brick
- Aerated concrete
For the thermally separated fixing of:
- Awnings
- Canopies
- French balcony railings
- Air conditioning units
- Satellite dishes
Application Notes:
- The TherMax 12 is suitable for pre-positioned installation.
- The self-tapping, glass fibre reinforced cone cuts its own way through the plaster into the insulation during installation.
- The anti-cold cone uses a thermal barrier to minimise heat losses.
- In the case of resistant plaster (e.g. thick cement plaster), it is recommended that the TherMax cutting blade included is used for grinding out the plaster.
- The sealing of the annular gap with the adhesive and sealant Multi MS or KD or the construction adhesive sealant DKM seals the façade at plaster level.