{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Wedge anchor zinc-plated steel FBN II 12/180 GS
Article no.: 417722
Catalog no.: 4979
Article code:
Product details
Technical Data
| d0 | 12 mm | |
| SW | 19 mm | |
| Number of nuts | 1 | |
| Material | Galvanised steel | |
| h2 | 265 mm | |
| Fixing with expansion tool | No | |
| Drive | Hexagonal | |
| hef | 65 / 50 mm | |
| M | M12 | |
| Disc | 44 x 4 mm | |
| Professional / DIY | Profi | |
| With collar | No | |
| Number of washers | 1 | |
| Surface protection | Galvanic/electrolytic zinc plated | |
| Packing | Folding box | |
| Head marking | U | |
| Anchoring depth | 65 mm | |
| Max. thickness of the attachment | 180 mm | |
| l | 274 mm | |
| M x ls | M12 x 189 mm | |
| Test marks / approvals | ETA - European Technical Assessment |
Packaging units
| 1 Pack | 10 Pieces | |
| 1 Pallet | 480 Pieces |
Identification & Classification
| Article number | 417722 | |
| Catalog number | 4979 | |
| EAN / GTIN | 4006209455845 | |
| Manufacturer number | 45584 | |
| Article class | RMC |
Description
Advantage:
- The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction.
- The pre-fitted washer ensures a fast assembly.
- The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
- The anchor is also ideal for large fixture thicknesses.
- The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
- Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
- The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
Application Area:
- Anchor plates with slotted holes
- Façade sub-structures with slotted holes
- Timber constructions
- Tension anchor
- Anchoring of wooden beams
Approved for:
- Concrete C20/25 to C50/60, non-cracked
- Concrete C12/15
- Natural stone with dense structure
Application Notes:
- The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions.
- Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut).
- When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall.
- The head embossing offers a simple control of the anchoring.
- In the case of series installation, we recommend using the FABS bolt anchor setting tool.