{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Highbond anchor FHB II-A L M 20 x 210/150 gvz
Article no.: 418308
Catalog no.: 4007
Article code:
Product details
Technical Data
| Ausführung | con filettatura esterna | |
| d0 | 25 mm | |
| SW | 30 mm | |
| Anwendungsbedingungen | Brandschutz-Klassifizierung | |
| Material | Stahl galvanisch verzinkt 8.8 | |
| Baustoff | gerissener Beton | |
| Brandschutz relevant | Ja | |
| M | M20 | |
| Skalenteile Mörtel | 33 | |
| Mit Mörtelpatrone | Nein | |
| Profi / DIY | Profi | |
| Verpackung | Faltschachtel | |
| Verankerungstiefe | 210 mm | |
| max. Dicke des Anbauteils | 150 mm | |
| l | 406 mm | |
| Prüfzeichen / Zulassungen | Brandgutachten | |
| Bohrlochtiefe h1 | 235 mm |
Packaging units
| 1 Pack | 8 Pieces | |
| 1 Pallet | 384 Pieces |
Identification & Classification
| Article number | 418308 | |
| Catalog number | 4007 | |
| EAN / GTIN | 4006209523704 | |
| Manufacturer number | 52370 | |
| Article class | RMP |
Description
Advantage:
- The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required.
- The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved.
- The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application.
- No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time.
- When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools.
Application Area:
- Façades
- Staircases
- Steel brackets
- Machines
- Silo installations
- Masts
- Rash protection
- Steelwork constructions
- Timber constructions
Approved for:
- Concrete C20/25 to C50/60, cracked and non-cracked
- Concrete C12/15
Application Notes:
- The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation.
- When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB.
- The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole.
- When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall.
- The styrene-free vinyl ester mortar fully seals the drill hole.
- When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art.-No. 62420.